GP-50-A Modified Silicone Emulsion for Mold Release

Request a Quote

Price is dependant on quantity, please request a quote for more information. If you are interested in samples, please refer to our sample price policy.


GP-50-A is a high performance, water-based release agent containing 50% by weight of a modified dimethyl silicone fluid. GP-50-A is recommended where a higher level of release performance is required, such as multiple releases. GP-50-A is a fine particle size emulsion compounded to provide exceptional stability both as a concentrate and at all dilution levels with hard or soft water.

Typical Properties
White, Opaque Liquid
Emulsifier Type
Weight/Gallon @ 25°C
8.0 lbs
Specific Gravity
Wt. % Silicone
Solvent Content


GP-50-A is to be used as a mold release agent for the following types of parts:

  • Rubber
  • Plastic

Processing and Safety Guidelines

GP-50-A may be applied by spraying, swabbing or dipping. GP-50-A is stable indefinitely and does not require premixing. If contacted with eyes, flush with water. For additional safety information, refer to Safety Data Sheet.


GP-50-A is available in 5-gallon (40 lbs.) pails, 55-gallon (440 lbs.) drums and 330-gallon (2735 lbs.) totes. Do not freeze. Do not store above 80° F.