Request a Quote
Price is dependant on quantity, please request a quote for more information. If you are interested in samples, please refer to our sample price policy.
Description
GP-705 is a stable, water-dilutable emulsion, comtaining 35% silicone resin-fluid copolymer. It is intended for use as a high-performance mold release agent in the casting of plastic or rubber articles. The ability of applied coatings of GP-705 to remain in place and not show run-off or creep after water evaporation allows superior mold release performance when compared to conventional silicone release emulsions
GP-705 is compounded to provide exceptional stability both in concentrate form and when diluted with hard or soft water.
| Typical Properties | |
|---|---|
| Appearance |
White, Opaque Liquid
|
| Emulsifier Type |
Nonionic
|
| Weight/Gallon @ 25°C |
8.2 lbs
|
| Specific Gravity |
0.99
|
| Wt. % Silicone |
35%
|
| Solvent Content |
0%
|
Applications
- Release agent for plastic molds
- Lubricant for Latex Rubber
- Textile Finish (reduce friction of thread and yarn)
- Rubber Mold Release Agent
- Release Agent for Molded Polyurethane
Processing and Safety Guidelines
GP-705 may be applied by spraying, swabbing or dipping. GP-705 is stable indefinitely and does not require premixing. If contacted with eyes, flush with water. For additional safety information, refer to Safety Data Sheet.
Packaging/Handling/Storage
GP-705 is available in 5-gallon (40 lbs.) pails, 55-gallon (440 lbs.) drums and 330-gallon (2640 lbs.) totes. Do not freeze. Do not store above 80° F.