Product Information

Genesee Polymers Corporation
G-4099 Dort Hwy
Burton, Michigan 48529

Phone: (810) 715-5018
Fax: (810) 742-8581

Main Literature Page
Return to Amine functional Fluids
Contact Us



GP-6 is an amine functional silicone polymer with the following structure where x=100 and y=4:

GP-6 is compatible with dimethyl silicone fluids and with aliphatic, aromatic and chlorinated hydrocarbon solvents. Some of the special properties of GP-6 are listed below:

High Amine-Alkyl Content
Stable Indefinitely in Closed Containers
Good Heat Stability

The amine-alkyl functionality of GP-6 provides a versatile reaction site for the synthesis of a variety of silicone-organic copolymers which may be tailored for use in textiles, coatings, car polishes and many other applications. The polar amine groups in GP-6 demonstrate a high affinity for many substrates, suggesting uses of GP-6 in lubricant, coating and mold release formulations. Some specific applications are listed below:

Rubber and Plastic Mold Release
Rust Inhibitor Coatings
Internal Mold Release
Detergent Resistant Car Polishes

Typical Properties:

Appearance Clear, Colorless to Light Straw Liquid
Wt./Gallon 8.0 lbs.
Viscosity @ 25°C 260 cSt.
Flash Point (P.M.C.C.) >200°F
Specific Gravity 0.98
% Active 100%
Amine Number* 49

* milliliters of 0.1N HCl needed to neutralize 10 gms GP-6


Processing and Safety Guidelines:

GP-6 is an alkaline material because of its amine content. Care should be exercised in handling to prevent contact with skin or eyes. Wear safety glasses with side shields and rubber gloves when handling. Consult Material Safety Data Sheet for additional details.


GP-6 is supplied in 5-gallon (40 lbs.) pails and 55-gallon (440 lbs.) drums. Moisture Sensitive. Keep container tightly sealed. Store below 100° F. Do not weld or cut drum, even when empty.